One Pull Angle Iron, Flat Eye, Diagonal Bends

All figures show the No. 2 Bender with tooling needed for the specific bend. All tooling sold separately.

One Pull Inbend Angle Iron Bending

No. 102B one pull type die set for bending 3/4″ x 3/4″ x 1/8″ through 1-1/4″ x 1-1/4″ x 1/8″ angle iron, flange inward, without wrinkling. 2-3/4″, 3″ and 3-3/8″ radius are available. (Figure 27)

Flat Eye Attachment

Attachment for bending eyes on Trailer or Truck Springs as well as other flat stock for heavy hinges, etc. Capacity for Hot Bending, 4-1/2″ x 3/8″ Spring steel or its equivalent. (Figure 28)

Bending Square Tubing on Section Diagonal 180

Bend Square Tube, 1/2″ through 1″ on Section Diagonal, 180 Degrees. Radius depends on wall thickness and tube size. (Figure 28-1)

Bending Square Tubing on Feed Along

Bend Square Tube, 1/2″ through 1-1/4″ on Section Diagonal on 10″ or larger radius Feed-Along Type. (Figure 28-2)