All figures show the No. 2 Bender with tooling needed for the specific bend. All tooling sold separately.
Large Radius Bends on Square Tubing
Larger Radius Bends from 8″ inside radius and up on Square Tube up to 1-1/2″ size. (Figure 23-2)

Bending Rectangular Tube
Feed-Along Type tooling for edgebending Rectangular Tube, 3/4″ x 1-1/2″, 1″ x 1-1/2″ and 1″ x 2″ to 10″ Minimum Inside Radius. (Figure 23-3)

Edgebending Handrail Capping
4″ Centerline Radius can be done without twisting or distortion (Figure 24). Edgebending Handrail Cap and 1″ x 1/2″ x 1/8″ Channel Combined. Hydraulic attachment and “L” Type Swinging Frame not shown, but is recommended (Figure 24-1). Bending two and three piece Molded Handrail Assembly to larger radius, 10″ and up (Figure 24-2).



Bending Angle Iron Heel Inward
Bend Angle Iron 1/2″ x 1/2″ x 1/8″ through 1-1/2″ x 1-1/2″ x 3/16″ Heel Inward to 10″ or larger radius. (Figure 24-3)

Bending Angle Iron Heel Outward
Bend Angle Iron 1/2″ x 1/2″ x 1/8″ through 1-1/2″ x 1-1/2″ x 3/16″ Heel Outward to 14″ or larger radius. (Figure 24-4)
