H60 HYDRAULIC PUMP

State-of-the-Art Technology
  • Modular design using industry standard components
  • Quieter and more efficient…
    ​State-of-the-art pressure-balanced gear pump provides greater efficiency and quiet operation.
  • Comes standard with stroke limit switch for precision bending
  • Redesigned foot switch with foot guard large enough for steel-toed boots
  • 10-ft cord lets you place foot switch where it’s most convenient
Bending heavy stock is even easier with the fully-redesigned H60 Hydraulic Pump – the only hydraulic unit you’ll ever need for the Model No. 2 Bender. All-hydraulic pump is faster than air-over-hydraulic — 1000 psi bends 2″ Pipe in under 2 minutes, depending on operator skill.
​
FEATURES
  • 1000 PSI – bend just as fast using less force
  • FAST! Pumps 453 cu. in. of oil per minute
  • Operates on 15 amp circuit
  • Stroke limit switch attaches to bender circle for repeat bends
  • All-new foot switch with OSHA-approved foot guard
  • Separate extend/retract pedals
  • Foot switch and 10-foot cord accommodates your shop arrangement, and gives you hand-free control
  • Liquid-filled pressure gauge for easy pressure reading
  • Large adjustment knob for easy pressure control, even with gloves on
    ​
CAPACITY
  • 1-1/4″ – 2″ OD Tube
  • 1″ – 2″ Sched. 40 Pipe
  • 1-1/2″ x 1-1/2″ x 1/8″ through 2″ x 2″ x 3/16″ Angle Iron
  • 3/4″ –1-1/4″ Round or Square Bar
  • Rectangular Tube up to 1″ x 2″
  • Edgebend Flat stock up to 1/2″ thick
Part Number
​49400
Description
​Standard H60 Hydraulic Package
Price
Call
Shipping Weight
​176 lbs
Our best value!
Package includes everything you need to use hydraulic power for most applications: H60 Hydraulic Power Unit, double-action hydraulic cylinder, hoses, foot switch, and conversion kit to convert Model No. 2 Bender to hydraulic power.*

Package includes:
  • H60 Hydraulic Pump with Hoses and Foot Switch
  • H4 Hydraulic Cylinder Ass’y
  • Hydraulic Hardware Conversion Kit
* Standard Package allows bends up to 90º only when using 180º OD Tube and Pipe Dies. For full 180º rotation, purchase 49401 L-Frame Hydraulic Package, or add the L-Frame later.

49400 Standard Hydraulic Package shown 
​with Standard Model No. 2 Bender and Pedestal Stand.
Part Number
​49401
Description
​H60 L-Frame Hydraulic Package
Price
​Call
Shipping Weight
​219 lbs
Includes everything in the Standard package plus the “L-Type” Swinging Frame for bending 180º with wraparound Tube and Pipe Dies. L-Frame switches easily with Standard Swinging Frame using a single pin.

Package includes:
  • H60 Hydraulic Pump with Hoses and Foot Switch
  • H4 Hydraulic Cylinder Ass’y
  • Hydraulic Hardware Conversion Kit
  • H52 “L-Type” Swinging Frame

No. 2 Bender with attached L-Type Swinging Frame (shown in red)
​for bending Tube and Pipe to 180
Part Number
​49405
Description
​H60 Hydraulic Pump with Hoses and Foot Control
Price
Call
Shipping Weight
​75 lbs
Upgrade Your Pump! Standalone pump unit.
Fully self-contained and electronically controlled.
Part Number
​49270
Description
​H52 “L-Type” Swinging Frame
Price
Call
Shipping Weight
​45 lbs
Replace Standard Swinging Frame with L-Type Swinging Frame for full 180º functionality with all 180º OD Tube and Pipe Dies. Make the change in seconds — installs with a single pin; no wrenches or tools necessary.
Part Number
​49285
Description
​90° “One Stroke” Hydraulic Cylinder Mount
Price
Call
Shipping Weight
​15 lbs
​Special attachment lets you mount hydraulic cylinder directly onto bender main frame rather than ratchet bar for true “one stroke” 90º bends.
​Maximum recommended size: 1″ P x 5″ CLR