One Pull Angle Iron, Flat Eye, Diagonal Bends
All figures show the No. 2 Bender with tooling needed for the specific bend. All tooling sold separately.
One Pull Inbend Angle Iron Bending
No. 102B one pull type die set for bending 3/4″ x 3/4″ x 1/8″ through 1-1/4″ x 1-1/4″ x 1/8″ angle iron, flange inward, without wrinkling. 2-3/4″, 3″ and 3-3/8″ radius are available.
Flat Eye Attachment
Attachment for bending eyes on Trailer or Truck Springs as well as other flat stock for heavy hinges, etc. Capacity for Hot Bending, 4-1/2″ x 3/8″ Spring steel or its equivalent. (Figure 28)
Bending Square Tubing on Section Diagonal 180
Bend Square Tube, 1/2″ through 1″ on Section Diagonal, 180 Degrees. Radius depends on wall thickness and tube size. (Figure 28-1
Bending Square Tubing on Feed Along
Bend Square Tube, 1/2″ through 1-1/4″ on Section Diagonal on 10″ or larger radius Feed-Along Type. (Figure 28-2)