Race & Custom Car   •   Choppers   •   Off Road   •   ATV   •   Structures   •   Duck Blinds   •   Fencing   •   Racks   •   Shelving & more

More Handrail, Square Tube, Angle Iron

Larger Radius Bends on Square Tubing
Bending Rectangular Tube
Edgebending Handrail Capping
Bending Angle Iron Heel Inward
Bending Angle Iron Heel Outward

More Handrail, Square Tube, Angle Iron

All figures show the No. 2 Bender with tooling needed for the specific bend. All tooling sold separately.

Figure1

Larger Radius Bends on Square Tubing

Larger Radius Bends from 8″ inside radius and up on Square Tube up to 1-1/2″ size. (Figure 23-2)

Back to top

Figure1

Bending Rectangular Tube

Feed-Along Type tooling for edgebending Rectangular Tube, 3/4″ x 1-1/2″, 1″ x 1-1/2″ and 1″ x 2″ to 10″ Minimum Inside Radius. (figure 23-3).

Back to top

Figure1

Figure1

Figure1

Edgebending Handrail Capping

4″ Centerline Radius can be done without twisting or distortion. (Figure 24)

Edgebending Handrail Cap and 1″ x 1/2″ x 1/8″ Channel Combined. Hydraulic attachment and “L” Type Swinging Frame not shown, but is recommended. (Figure 24-1)

Bending two and three piece Molded Handrail Assembly to larger radius, 10″ and up.
(Figure 24-2)

Back to top

Figure1

Bending Angle Iron Heel Inward

Bend Angle Iron 1/2″ x 1/2″ x 1/8″ through 1-1/2″ x 1-1/2″ x 3/16″ Heel Inward to 10″ or larger radius. (Figure 24-3)

Back to top

Figure1

Bending Angle Iron Heel Outward

Bend Angle Iron 1/2″ x 1/2″ x 1/8″ through 1-1/2″ x 1-1/2″ x 3/16″ Heel Outward to 14″ or larger radius. (Figure 24-4)

Back to top