H60 Hydraulic Pump

ALL-NEW H60 Hydraulic Pump

• LOWER PRICES!
• STATE-OF-THE-ART TECHNOLOGY!
• NEW! Modular design using industry standard components
• NEW! Quieter — More efficient — State-of-the-art pressure-balanced gear pump provides greater efficiency and quiet operation.
• NEW! Comes standard with stroke limit switch for precision bending
• NEW! Redesigned foot switch with foot guard large enough for steel-toed boots
• NEW! 10-ft cord lets you place foot switch where it's most convenient

Bending heavy stock is even easier with the fully-redesigned H60 Hydraulic Pump – the only hydraulic unit you'll ever need for the Model No. 2 Bender. All-hydraulic pump is faster than air-over-hydraulic -- 1000 psi bends 2" Pipe in under 2 minutes, depending on operator skill.

Features

• 1000 PSI – bend just as fast using less force
• FAST! Pumps 453 cu. in. of oil per minute
• Operates on 15 amp circuit
• Stroke limit switch attaches to bender circle for repeat bends
• All-new foot switch with OSHA-approved foot guard
• Separate extend/retract pedals
• Foot switch and 10-foot cord accommodates your shop arrangement, and gives you hand-free control
• Liquid-filled pressure gauge for easy pressure reading
• Large adjustment know for easy pressure control – even with gloves on
  

Capacity

• 1-1/4" – 2" OD Tube
• 1" – 2" Sched. 40 Pipe
• 1-1/2" x 1-1/2" x 1/8" through 2" x 2" x 3/16" Angle Iron
• 3/4" –1-1/4" Round or Square Bar
• Rectangular Tube up to 1" x 2"
• Edgebend Flat stock up to 1/2" thick

49400 Standard Hydraulic Package shown with
Standard Model No. 2 Bender and Pedestal Stand

Our best value. Package includes everything you need to use hydraulic power for most applications: H60 Hydraulic Power Unit, double-action hydraulic cylinder, hoses, foot switch, and conversion kit to convert Model No. 2 Bender to hydraulic power.*

Package includes:

• H60 Hydraulic Pump with Hoses and Foot Switch
• H4 Hydraulic Cylinder Ass'y
• Hydraulic Hardware Conversion Kit 

No. 2 Bender with attached L-Type Swinging Frame (shown in red) for bending Tube and Pipe to 180

Includes everything in the Standard package plus the "L-Type" Swinging Frame for bending 180º with wraparound Tube and Pipe Dies. L-Frame switches easily with Standard Swinging  Frame using a single pin.

Package includes:

• H60 Hydraulic Pump with Hoses and Foot Switch
• H4 Hydraulic Cylinder Ass'y
• Hydraulic Hardware Conversion Kit
• H52 "L-Type" Swinging Frame

Upgrade Your Pump

Standalone pump unit. Fully self-contained and electronically controlled.

Replace Standard Swinging Frame with L-Type Swinging Frame for full 180º functionality with all 180º OD Tube and Pipe Dies. Make the change in seconds — installs with a single pin; no wrenches or tools necessary.

Special attachment lets you mount hydraulic cylinder directly onto bender main frame rather than ratchet bar for true "one stroke" 90º bends.

Maximum recommended size: 1" P x 5" CLR